Click on the image to check the artwork
|
Module Number |
SNS51867-V1.0 |
Sensor |
OV5648 |
|
Resolution |
5mp |
Dimension |
Customizable |
|
Lens FOV |
125(Optional) |
Focus Type |
Fixed Focus |
|
Interface |
MIPI |
Feature |
Low crosstalk and low noise |
With its high resolution of 2592x1944, the OV5648 CMOS sensor provides rich detail and clear images for professional imaging applications. The sensor's OmniBSI+ technology significantly improves light sensitivity while reducing image noise, allowing clear images to be captured even in low light environments. The design of the electronic rolling shutter effectively controls the dynamic blur and is suitable for capturing high-speed moving scenes.
The sensor supports the original RGB data output format, providing users with greater flexibility and richer color information for post-processing. The design of MIPI interface ensures the high speed and stability of data transmission, and meets the demand of modern imaging system for data transmission speed. In addition, the 650nm IR anti-infrared interference filter ensures imaging stability in complex lighting conditions.
In terms of power control, the OV5648 performs well, maintaining low energy consumption even at high frame rates, which is particularly important for devices that need to run for long periods of time.
Features
•1.4 um x 1.4 um pixel with OmniBSl+ technology for high performance (high sensitivity, low crosstalk, low noise)
•optical size of 1/4"
•Automatic image control functions: automatic exposure control (AEC), automatic gain control(AGC), automatic white balance (AvvB). and automatic black level calibration (ABLC)
•programmable controls for frame rate. AEC/AGC16-zone size/position' weight control, mirror and flip.cropping,windowing, and panning
•defective pixel canceling
•support for output formats: 8-/10-bit raw RGB data
•support for video or snapshot operations
•support for LED and flash strobe mode
•support for internal and external frame synchronization for frame exposure mode
•support for horizontal and vertical sub-sampling
•standard serial SCCB inter face
•MlPl interface (two lanes)
•32 bytes of embedded one-time programmable(OTP) memory
•on-chip phase lock loop (PLL)
•embedded 1.5V regulator for core power
•programmable l/O drive capability, l/O tri-state configurability
•support for black sun cancellation
Specifications and features.
| Total height | 6.3±0.2mm |
| Base size | 8.5*8.5±0.2mm |
| Image size | 2592*1944 |
| IR filter | 650 |
| Chip parameters. | |
| key specifications (typical) | |
•active array size: 2592 x 1944
•power supply:
core: 1.5V+ 5% (with embedded 1.5V regulator)
analog:2.6-3.0V(2.8Vtypical)
I/O:1.7V-3.0V
•power requirements:
active: 198 mW
standby: 35 pW
•temperature range:
operating:-30'C to 70°C junction temperature
(see table 8-2)
stable image: 0'C to 50'C junction temperature
(see table 8-2)
•output formats: 8-/10-bit RGB RAW output
•lens size: 1/4"
•lens chiefray angle: 29.1°(see figure 10-2)
•input clock frequency: 6~27 MHz
•max S/N ratio: 34 dB
•dynamic range: 67 dB @ 8x gain
•maximum image transfer rate:
QSXGA (2592 x 1944): 15 fps
1080p: 30 fps
960p: 45 fps
720p: 60 fps
VGA (640 x 480): 90 fps
•sensitivity:600mV/Lux-sec
•shutter: rolling shutter
•pixel size: 1.4 um x 1.4 um
•dark current: 8 mV/s @ 50'C junction temperature
•image area: 3673.6 μm×2738.4 μm
•package dimensions: 5010 μm x 4810 μm
1. Face recognition system: Used in face recognition systems to provide high definition images and enhance recognition accuracy
2. Action camera: Used for outdoor sports cameras to capture dynamic scenes, suitable for extreme sports recording
3. Astrophotography: Used in astrophotography to capture high definition images of starry skies and celestial bodies
http://www.muchvision.com/